Material |
Roll Width |
Single Roll Length |
Single Roll Coverage |
Paper & Sericite |
92cm |
10m |
9.2m² |
52cm |
5.2m² |
PVC & Sericite |
105cm |
10m |
10.6m² |
15.6m |
16.54m² |
NATURAL SERICITE WALLPAPER
|
COLOR |
|
|
|
HOW TO POWDERED-PAINT
- Prepare 9L of water. (Using lukewarm water is recommended.)
- Within 1 minute of adding paste to the prepared water, please stir well so that there is no lump of paste.
- The dissolved paste should be left for about 15 minutes before being applied.
- Apply a generous, even coat of paste over the paper, working from the center outwards. Ensure that the edges are well pasted but avoid paste coming into contact with the pattern side of the paper. Fold the paper with the adhesive side innermost and allow the paper to soak for 10 minutes, until pliable. If the paper becomes too wet it will shrink back as it dries.
- Check pattern repeat before cutting lengths according to the height of the wall and allow about 6 centimeters at the top and bottom for trimming.
- Please ensure any past left on the paper is completely and carefully removed before it dries.